This test is done in a hospital or outpatient facility. You will lie on an x-ray table. You may ask for a sedative if you are anxious about the test. The area where the catheter will be inserted will be shaved and cleansed (the site is usually in the groin area). Local anesthetic is used, and a needle is used to puncture the artery so that an intravenous catheter (a flexible tube) can be inserted. The catheter is inserted through the needle and into the artery. It is then threaded until it is in the artery of interest. This procedure is monitored by fluoroscopy (a type of x-ray that projects moving images onto a TV monitor). Contrast material is injected and x-ray images are taken. The catheter is flushed periodically with a saline solution, which will keep the blood in the catheter from clotting. If clinically warranted, a treatment may be performed during the arteriography procedure. Possible treatments include dissolving a blood clot with medicine, opening a partially blocked artery with a balloon, or placing a sterile tube into an artery to help prop open a narrowed portion of the artery. These treatments are all performed through the catheter used for the arteriography procedure Your pulse (heart rate), blood pressure, and breathing are monitored during the procedure. After the x-rays are taken, the needle and catheter are withdrawn. Pressure is immediately applied on the leg at the site of insertion for 10 - 15 minutes to stop the bleeding. After that time, the area is checked and a bandage is applied. The leg should be kept straight for 6 hours after the procedure, and strenuous activity, such as heavy lifting, should be avoided for 24 - 48 hours.
|